MA100A ADVANCE gearbox ratio range is 1.60-3.88, transmission capacity is 0.006-0.009 kW/rpm. Input speed is 1500-3000rpm, maximum power 27kW at 3000rpm.
Standard Configuration
- Hydraulic control system
- Oil pump
- Oil filter
- Oil pressure gauge
- Bell housing
- Output coupling
- Mounting bracket
| MA100A Ratio | Transmission Capacity (kW/rpm) |
| 1.60 2.00 | 0.009 |
| 2.55 3.11 | 0.007 |
| 3.59 3.88 | 0.006 |
Note:
- ADVANCE MA100A Gearbox input speed range is 1500-3000rpm.
- Transmission capacity indicates the proportion of the engine continuous power to the rated speed (kW/rpm). When selecting model, the actual transmission capacity should be smaller than the data listed.
Technical Data of ADVANCE MA100A Marine Gearbox
- Mechanical control
- Center distance 100mm
- Rated propeller thrust 3KN
- Mechanical efficiency ≥ 0.96
- Rotation direction of output shaft, contrary to that of input shaft at ahead position
- Hydraulic pressure 1-1.3Mpa
- Initial oil pressure 0.15-0.4Mpa
- ADVANCE gearbox MA100A oil grade, SD/CC30 or SAE30, SD/CC40 or SAE40 (for summer in the torrid zone)
- Oil capacity 2L
- Overaul (bearing life) 6000h
- Permissible angle of inclination, 10° longitudinally, 15° transversely
– Flywheel housing (SAE 3 4 5)
– Flywheel (SAE 11.5 10 7.5)
– Shaft coupling (companion coupling) with bolts and nuts
– Power take-off (PTO)
– CCS certificate
– Dimension 236mm*390mm*420mm
– Net weight 75kg
- MA100A Gearbox Datasheet
- ADVANCE Gearbox Catalogue
- MA100A Service Manual
- MA100A PDF Drawing
* Specifications subject to change without prior notice in the interest of continual product improvement. Technical data should be based on technical agreement for each order. Please contact our sales representative for engineering specifications, Survey Society Approvals and Classifications.