Advance marine gearbox HCD600A ratio range is 4.18-5.71 with rate 0.430-0.490kW/rpm. Input speed is 1000-2100rpm, max. power 1029kW at 2100rpm.
Standard Configuration
- Hydraulic control system
- Oil cooler
- Oil filter
- Oil pressure gauge
- Bell housing
- Output coupling
- Mounting bracket
- CCS certificate
| Ratio | 418 4.43 4.70 5.00 | Rate (kW/rpm) | 0.490 |
| 5.44 | 0.450 | ||
| 5.71 | 0.430 |
Note:
- Advance HCD600A Gearbox input speed range is 1000-2100rpm.
- Rate indicates the proportion of the engine continuous power to the rated speed (kW/rpm). When selecting model, the actual rate should be smaller than the data listed.
- The rate is based on toothed rubber blocks coupling, if use highly flexible coupling, rate will rise 8%.
Technical Data of Advance HCD600A Marine Gearbox
- Center distance 415mm
- Rated propeller thrust 90KN
- Mechanical efficiency ≥ 0.9
- Rotation direction of output shaft, contrary to that of input shaft at ahead position
- Hydraulic pressure 1.1-1.3Mpa
- Advance gearbox HCD600A oil grade, SD/CC30 or SAE30, SD/CC40 or SAE40 (for summer in the torrid zone)
- Oil capacity 40L
- Permissible angle of inclination, 10° longitudinally, 15° transversely
– Flywheel housing (SAE 00 0 1)
– Flywheel (SAE 21 18 16 14)
– Mechanical control / Electric control / Pneumatic control
– Toothed rubber blocks / Highly flexible coupling
– Oil temperature gauge
– Alarm device (oil temperature, working pressure, lubricating pressure)
– Shaft coupling (companion coupling) with bolts and nuts
– Dimension 745mm*1214mm*1271mm
– Net weight 1550kg
– Advance Gearbox Catalogue
– Datasheet
– Service Manual
– PDF Drawing
* Specifications subject to change without prior notice in the interest of continual product improvement. Technical data should be based on technical agreement for each order. Please contact our sales representative for engineering specifications, Survey Society Approvals and Classifications.