HC400 ADVANCE gearbox ratio range is 1.50-4.94, transmission capacity is 0.190-0.331 kW/rpm. Input speed is 1000-1800rpm, max. power 595.8kW at 1800rpm.
Standard Configuration
- Hydraulic control system
- Oil cooler
- Oil filter
- Oil pressure gauge
- Bell housing
- Output coupling
- Mounting bracket
- CCS certificate
| HC400 Ratio | Transmission Capacity (kW/rpm) |
| 1.50 1.77 2.04 2.50 2.86 3.00 3.25 3.33 3.42 | 0.331 |
| 4.06 | 0.279 |
| 4.61 4.94 | 0.190 |
Note:
- ADVANCE HC400 gearbox input speed range is 1000-1800rpm.
- Transmission capacity indicates the proportion of the engine continuous power to the rated speed (kW/rpm). When selecting model, the actual transmission capacity should be smaller than the data listed.
- The transmission capacity is based on toothed rubber blocks coupling, if use highly flexible coupling, transmission capacity will rise 8%.
Technical Data of ADVANCE HC400 Marine Gearbox
- Center distance 264mm
- Rated propeller thrust 82KN
- Mechanical efficiency ≥ 0.96
- Rotation direction of output shaft, contrary to that of input shaft at ahead position
- Working oil pressure 1.3-1.5Mpa
- ADVANCE gearbox HC400 oil grade, CC30, CC40 or SAE30; CC50 (for summer in the torrid zone)
- Oil capacity 23L
- Permissible angle of inclination, 10° longitudinally, 15° transversely
– Flywheel housing (SAE 0 1)
– Flywheel (SAE 18 16 14)
– Mechanical control / Electric control / Pneumatic control
– Toothed rubber blocks / Highly flexible coupling
– Oil temperature gauge
– Alarm device (oil temperature, working pressure, lubricating pressure)
– Shaft coupling (companion coupling) with bolts and nuts
– Output coupling (customized)
– Power take-off (PTO)
– Dimension 641mm*1010mm*890mm
– Net weight 820kg
- HC400 Gearbox Datasheet
- ADVANCE Gearbox Catalogue
- HC400 Service Manual
- HC400 PDF Drawing
* Specifications subject to change without prior notice in the interest of continual product improvement. Technical data should be based on technical agreement for each order. Please contact our sales representative for engineering specifications, Survey Society Approvals and Classifications.