Standard Configuration
- Controller
- 2-stage control valve
- Filter & Cooler
- Pressure switch
- Temperature switch
- Input flange
- Output shaft
- Mounting bracket
- CCS certificate
Key Features of Advance GWL70.82 Marine Gearbox
GWL70.82 reduction gear without reverse function corresponds to the GWC model in that it has a primary and a reduction stage. Input and output are coaxial and have the same sense of rotation.
| Input Speed (rpm) | Ratio | Rate (kW/rpm) |
| 300-465 | 2.05 | 17.451 |
| 300-575 | 2.53 | 14.139 |
| 300-705 | 3.09 | 11.563 |
| 300-815 | 3.58 | 9.977 |
| 300-900 | 3.95 | 9.05 |
| 300-950 | 4.57 | 7.815 |
| 300-1150 | 5.04 | 7.082 |
| 300-1150 | 5.58 | 6.409 |
| 300-1150 | 6.17 | 5.791 |
| 300-1150 | 6.50 | 5.5 |
| 300-1150 | 6.98 | 5.122 |
| 300-1150 | 7.49 | 4.771 |
Important note:
The Advance marine gearbox GWL70.82 can not be held responsible for torsional problems arising from the drive system. We therefore recommend that a calculation and adjustment for the vibrational data of the ship’s entire drive system should be performed including the torsional compatibility of the gearbox.
– Rated propeller thrust 780kN
– Oil grade
SD/CC30 or SAE30
SD/CC40 or SAE40 (in summer of the torrid zone)
– Max. lub. oil temperature 80℃
– Cooling water inlet temperature ≤ 32℃
– Cooling water inlet pressure ≤ 0.6Mpa
– Reversing time t ≤ 15s
– Mechanical efficiency ≥ 0.97
– Permissible angle of inclination
Longitudinal 10°
Transverse15°
– Overhual 10000h
– Pneumatical / electrical operation with manual emergency control device
– Highly flexible coupling
– Stand-by pump set
– Net weight 25500kg
– Service Manual
– Certificate
– Assembling drawing
– Outlook and installation drawing
– Part list
– List of torque vibrational data
– Diagram for clutch thermal load limited (Switching frequency)
– Maintenance Card
– Datasheet
– Service Manual
– PDF Drawing
The data is applicable to the standard GW series Advance marine gearbox version. Variations are possible on special customer requirements.