Standard Configuration
- Controller
- 2-stage control valve
- Filter & Cooler
- Pressure switch
- Temperature switch
- Input flange
- Output shaft
- Mounting bracket
- CCS certificate
Key features of Advance GWK60.66 Marine Gearbox
GWK60.66 reduction gear has no reverse function and is of single stage design. Input and output are vertically offset and have opposite sense of rotation.
| Input Speed (rpm) | Ratio | Rate (kW/rpm) |
| 400-1200 | 2.00 | 5.05 |
| 2.54 | ||
| 2.96 | ||
| 3.50 | ||
| 3.95 |
Important note:
The Advance marine gearbox GWK60.66 can not be held responsible for torsional problems arising from the drive system. We therefore recommend that a calculation and adjustment for the vibrational data of the ship’s entire drive system should be performed including the torsional compatibility of the gearbox.
– Rated propeller thrust 450kN
– Oil grade
SD/CC30 or SAE30
SD/CC40 or SAE40 (in summer of the torrid zone)
– Max. lub. oil temperature 80℃
– Cooling water inlet temperature ≤ 32℃
– Cooling water inlet pressure ≤ 0.6Mpa
– Reversing time t ≤ 15s
– Mechanical efficiency ≥ 0.97
– Permissible angle of inclination
Longitudinal 10°
Transverse15°
– Overhual 10000h
– Pneumatical / electrical operation with manual emergency control device
– Highly flexible coupling
– Stand-by pump set
– Net weight 14000kg
– Service Manual
– Certificate
– Assembling drawing
– Outlook and installation drawing
– Part list
– List of torque vibrational data
– Diagram for clutch thermal load limited (Switching frequency)
– Maintenance Card
– Datasheet
– Service Manual
– PDF Drawing
The data is applicable to the standard GW series Advance marine gearbox version. Variations are possible on special customer requirements.