Standard Configuration
- Controller
- 2-stage control valve
- Filter & Cooler
- Pressure switch
- Temperature switch
- Input flange
- Output shaft
- Mounting bracket
- CCS certificate
Key Features of Advance GWL52.62 Marine Gearbox
GWL52.62 reduction gear without reverse function corresponds to the GWC model in that it has a primary and a reduction stage. Input and output are coaxial and have the same sense of rotation.
| Input Speed (rpm) | Ratio | Rate (kW/rpm) |
| 400-565 | 2.02 | 7.756 |
| 400-690 | 2.46 | 6.353 |
| 400-845 | 3.02 | 5.180 |
| 400-960 | 3.45 | 4.534 |
| 400-1135 | 4.06 | 3.852 |
| 400-1200 | 4.52 | 3.650 |
| 400-1200 | 5.04 | 3.102 |
| 400-1200 | 5.46 | 2.867 |
| 400-1200 | 5.96 | 2.631 |
Important note:
The Advance marine gearbox GWL52.62 can not be held responsible for torsional problems arising from the drive system. We therefore recommend that a calculation and adjustment for the vibrational data of the ship’s entire drive system should be performed including the torsional compatibility of the gearbox.
– Rated propeller thrust 300kN
– Oil grade
SD/CC30 or SAE30
SD/CC40 or SAE40 (in summer of the torrid zone)
– Max. lub. oil temperature 80℃
– Cooling water inlet temperature ≤ 32℃
– Cooling water inlet pressure ≤ 0.6Mpa
– Reversing time t ≤ 15s
– Mechanical efficiency ≥ 0.97
– Permissible angle of inclination
Longitudinal 10°
Transverse15°
– Overhual 10000h
– Pneumatical / electrical operation with manual emergency control device
– Highly flexible coupling
– Stand-by pump set
– Net weight 10700kg
– Service Manual
– Certificate
– Assembling drawing
– Outlook and installation drawing
– Part list
– List of torque vibrational data
– Diagram for clutch thermal load limited (Switching frequency)
– Maintenance Card
– Datasheet
– Service Manual
– PDF Drawing
The data is applicable to the standard GW series Advance marine gearbox version. Variations are possible on special customer requirements.