HCT650/2 ADVANCE gearbox ratio range is 9.51-18.06, transmission capacity is 0.29-0.49 kW/rpm. Input speed is 1000-2100rpm, max. power 1029kW at 2100rpm.
Standard Configuration
- Hydraulic control system
- Oil cooler
- Oil filter
- Oil pressure gauge
- Bell housing
- Output coupling
- Mounting bracket
- CCS certificate
| HCT650/2 Ratio | Transmission Capacity (kW/rpm) |
| 9.51 10.06 | 0.49 |
| 10.45 11.03 | 0.483 |
| 11.46 11.98 | 0.452 |
| 12.52 13.09 | 0.445 |
| 13.64 14.10 | 0.414 |
| 14.48 | 0.402 |
| 15.01 | 0.389 |
| 15.55 | 0.366 |
| 15.98 | 0.329 |
| 16.42 | 0.32 |
| 16.97 | 0.309 |
| 17.44 | 0.301 |
| 18.06 | 0.29 |
Note:
- ADVANCE HCT650/2 Gearbox input speed range is 1000-2100rpm.
- Transmission capacity indicates the proportion of the engine continuous power to the rated speed (kW/rpm). When selecting model, the actual transmission capacity should be smaller than the data listed.
- The transmission capacity is based on toothed rubber blocks coupling, if use highly flexible coupling, transmission capacity will rise 8%.
Technical Data of ADVANCE HCT650/2 Marine Gearbox
- Center distance 550mm
- Rated propeller thrust 160KN
- Mechanical efficiency ≥ 0.96
- Rotation direction of output shaft, same with that of input shaft at ahead position
- Hydraulic pressure 1.1-1.3Mpa
- ADVANCE gearbox HCT650/2 oil grade, SD/CC30 or SAE30, SD/CC40 or SAE40 (for summer in the torrid zone)
- Permissible angle of inclination, 10° longitudinally, 15° transversely
– Flywheel housing (SAE 00 0)
– Flywheel (SAE 21 18 16)
– Mechanical control / Electric control / Pneumatic control
– Toothed rubber blocks / Highly flexible coupling
– Oil temperature gauge
– Alarm device (oil temperature, working pressure, lubricating pressure)
– Shaft coupling (companion coupling) with bolts and nuts
– Dimension 966mm*1224mm*1515mm
– Net weight 2230kg
- HCT650/2 Gearbox Datasheet
- ADVANCE Gearbox Catalogue
- HCT650/2 Service Manual
- HCT650/2 PDF Drawing
* Specifications subject to change without prior notice in the interest of continual product improvement. Technical data should be based on technical agreement for each order. Please contact our sales representative for engineering specifications, Survey Society Approvals and Classifications.